Advantage Cab with A/C for the Kubota BX80
$9,293.35
Description
Stay comfortable year-round in the Curtis Advantage Cab with A/C, designed for Kubota BX2380 and BX2680 tractors (2018+ model years). This all-steel cab features vehicle color-matched doors and includes an integrated air conditioning system, heater, and front windshield wiper.
Featuring the ultimate in operator comfort, this system is equipped with true climate control that protects against heat, sun, rain, dust, and insects. Whether you’re working through summer or transitioning into colder seasons, the Advantage Cab delivers reliable comfort, visibility, and performance.
SKU:
Cab Features
- Front windshield wiper
- Cab heater
- Corrosion-resistant, powder-coated finish
- Doors and roof are color-matched to the Kubota orange
- Steel roof with acoustical headliner and tapered drip edge
- Venting glass windshield
- Venting, removable rear glass panel locks open to vent or lifts out
- Pin-hinged doors and rear panel for easy removal
- Large, clear glass windows and rear panel for distortion-free visibility
- Lockable doors
A/C Features
- Dynamic load control software efficiently manages vehicle electrical power with minimal draw
- Stylish, low-profile design with clearance to park in most standard garages
- Overhead console features multi-speed fan control and four 360° adjustable louvers
- Power kit includes supplemental alternator
- Easy installation in approximately two hours
- Comes pre-charged with refrigerant – no complicated initial set up
- Includes replacement roof
- Air conditioning available for Kubota BX Series
Required Components
- A/C Unit for the BX2380 & BX2680: 1ACUNIT-G1
- Replacement Roof for the BX2380 & BX2680: 1ACBX80CA2RFK
- Alternator Kit for 23 HP BX2380: 1ACBX2380DRK
- Alternator Kit for 26 HP BX2680: 1ACBX2680DRK
Cab Specs
- Shipping Dimensions: 76″ x 16″ x 70″
- Shipping Weight: 448 lbs
- Cab Weight: 305 lbs
- Cab Height: 59.25†(floorboard to roof)
- Heater: 20,000 BTU hot water system
- Backhoe Compatible: No
- Windshield: Glass
- Door Windows: Glass
- Rear Panel: Glass
- Roof: Steel with acoustical headliner
- Wiper: 12V heavy-duty motor with 110° sweep
- Mounting: Pre-drilled holes for optional side mirrors
A/C Specs
- Weight: 58 lbs (A/C unit with cover)
- Height Above Cab: 3 – 5/8″
- Intrusion into Cab: 2†(operator area), 3†(lowest point)
- System Voltage: 12V DC
- Running Amperage Draw: 60A (high blower speed)
- Housing: Powder-coated, corrosion-resistant aluminum alloy
- Cover: Powder-coated, corrosion-resistant aluminum alloy
- Evaporator Core: Automotive-grade, corrosion-resistant aluminum alloy, tube, and fin
- Condenser Core: Automotive-grade, corrosion-resistant aluminum alloy, bar plate, and fin
- Condenser Fan: Automotive-grade, 12V, 20A condenser fan
- Evaporator Blower: Automotive-grade, 12V, 10A squirrel cage fan with three speeds
- Intake: Laser cut into case, single point, recirculating, non-filtered
- Outlet: Four adjustable louvered vents
- Operator Controls: Compressor on/off switch and system on/off switch, with three blower speeds
- Load Control: Patented electronic automated system control of load and function
- Thermostat: Electronic, non-adjustable thermistor sensor
- Refrigerant: 2.1 lbs, R-134a
Includes a one-year warranty against defects in materials and/or workmanship.
- Rear Wiper: 9PWK8512F9-11A
- 3†Round Work Lights: 9LEDW3
- 2†x 6†Low-Profile Work Lights: 9LEDW4
- Strobe Light: 9LEDS2
- Dome Light: 9LEDD14
- Side Mirrors: 9PM5
- Rearview Mirror: 9PM3
- Seal Kit: 9SK3*
- Sure Step Kit: 9CST
*We recommend the optional seal kit (9SK3) for improved draft and dust protection.












































